Quality Inspection Checklist Before Accepting a Wholesale Shipment
Before you accept a wholesale jewelry shipment, a short inspection protects your brand and your customers. This checklist covers what to verify on 18K gold plated brass jewelry with AAA cubic zirconia, whether you buy from Hengdian (HD) Jewelry or any supplier.
1. Plating Check
Confirm the piece is 18K gold plated over brass with plating thickness of 0.1-0.3 micron. Look for an even, warm gold tone with no thin patches, dark spots, or color breaks at edges and joints. Our gold plated brass guide explains the plating standard in depth.
Inconsistent plating is the most common wholesale defect, so this step matters most.
2. Stone Setting
AAA CZ should sit securely with no visible glue and no loose stones. Gently test settings; a properly set stone does not move. Check that stone sizes and placements match the order spec. See the CZ rings buyer guide for stone-grade detail.
3. Finish and Edges
Run a finger along edges and clasps. Smooth, even polishing with no sharp points or burrs is the sign of controlled finishing. Inconsistent polish suggests weak process control.
4. Functionality
Open and close every clasp. Test earring backs, adjustable chains, and any moving part. A wholesale return is far costlier than a thirty-second function test at inspection.
5. Compliance and Documentation
Request the relevant compliance documents. Hengdian (HD) Jewelry provides REACH, RoHS, and ASTM alignment for materials and holds SGS factory certification. Nickel release is controlled to REACH limits; we avoid absolute nickel-safe guarantees because skin safety depends on controlled release, not a blanket statement.
6. Packaging and Counts
Verify piece counts against your purchase order and confirm standard OPP bag packaging. Our shipments leave the Guangzhou warehouse with counts checked, but a quick tally on arrival avoids disputes later.
Frequently Asked Questions
What certifications does HD Jewelry provide?
We provide REACH, RoHS, and ASTM material alignment and hold SGS factory certification. These documents support your own compliance and resale requirements.
How do you address nickel for sensitive skin?
We describe our pieces as nickel-release controlled to REACH limits rather than making a blanket nickel-safe guarantee, because skin safety is about controlled release. If you need specific documentation for your market, our team can provide it.
How are defects handled?
Our QC team inspects pieces before dispatch. For any post-shipment concern, contact your account manager with photos so we can review and advise on the next step.
Why does plating thickness matter?
Plating at 0.1-0.3 micron over brass defines both the look and the wear life of fashion jewelry. Too thin and color fades fast; our range balances appearance with a serviceable lifespan for retail use.
A disciplined inspection turns wholesale risk into routine. Pair this checklist with our gold plated brass guide and the CZ rings buyer guide, and learn how our factory keeps quality consistent.
